Supplier Directory Subscribe
Home / New Aeroel D-Lab Available for Contactless Measurement of Drawing Dies

New Aeroel D-Lab Available for Contactless Measurement of Drawing Dies

Marposs Corp.’s Aeroel D-Lab is able to capture a measurement within 1 second and with +.01 µm repeatability.

Posted: April 27, 2023

The Aeroel D-Lab from Marposs offers high accuracy measuring of drawing dies.

Marposs has announced its Aeroel D-Lab, a table-top non-contact measuring system for controlling the diameter (avg, max, min) and ovality of drawing dies for wire and other extruded products. D-Lab is able to capture the measurement within 1 second and with +.01 µm repeatability. It works by comparing the diameter and ovality against a pre-set nominal value and a tolerance range, immediately displaying colors indicating the tolerance status of the part.  These systems are ultra-accurate, highly flexible, extremely fast and easy to use regardless of operator skill level. 

The D-Lab can be used to measure different dies without requiring system re-mastering. It also features intuitive software along with an extensive number of control sets (tolerance limits, measuring mode, etc.) stored in a “part library”, making it very easy to use. Additionally, its rugged construction is designed to withstand workshop environments. 

The D-Lab has a measuring range of 0.5mm – 8mm, repeatability of ± 0.01 µm, resolution of 0.1 µm and accuracy between +1.0 – +2.0 µm, depending upon the die size.  All measured data is saved in the computer memory and ready to be exported in test or CVS format.  A statistical report is available, which can be immediately printed by using a standard PC printer. 

The D-Lab non-contact technology is based on telecentric optics with an LED collimated illuminator. The image is analyzed using a 2D CMOS sensor and subpixel edge detecting algorithm.

Subscribe to learn the latest in manufacturing.

Calendar & Events
Florida Design-2-Part Show
May 2 - 4, 2023
Orlando, FL
May 16 - 18, 2023
West Springfield, MA
Greater Chicago Design-2-Part Show
May 17 - 18, 2023
Schaumburg, IL
May 22 - 25, 2023
Detroit, MI
Greater Detroit Design-2-Part Show
June 14 - 15, 2023
Novi, MI
September 11 - 14, 2023
Chicago, IL